RSS

In Year 2012

Pameran Hari Kerjaya di MRSM Pontian (5/3/2012)

Pada 5 Mac 2012 yang lalu, telah berlangsungnya Pameran Hari Kerjaya di Maktab Rendah Sains MARA (MRSM) Pontian. Fakulti Kejuruteraan Elektrik UTM dijemput untuk mempamerkan hasil penyelidikan dan projek-projek Mahasiswa di UTM. Dr. Ahmad ‘Athif, Muammar dan Rusydi bersama-sama PM Dr. Yahya dan En. Fazli telah pergi ke sana bagi menjayakan program tersebut. Sebanyak 2 projek yang dipamerkan semasa Hari Pameran tersebut iaitu “Wireless Robot” dan “Soft Actuator”.

Gambar Semasa Pameran…

Program UTMost Imagination di UTM   (29/3 – 1/4/2012)

Alhamdulillah pada 29 Mac 2012 sehingga 1 April 2012 yang lepas, UTM sekali lagi telah menganjurkan program berskala besar iaitu UTMost Imagination. Program ini mendapat liputan meluas sehingga TV3 sendiri telah hadir untuk membuat liputan penuh bagi rancangan MHI.

Program yang bertemakan kreativiti dan inovasi ini dilihat amat baik bagi mempromosikan idea-idea baru dan teknologi-teknologi terkini kepada masyarakat umum. Festival yang berlangsung selama 4 hari ini telah mendapat sambutan yang sangat luar biasa daripada masyarakat umum. Beratus-ratus buah sekolah telah berkunjung ke booth-booth fakulti yang terdapat di UTM.

Fakulti Kejuruteraan Elektrik juga tidak ketinggalan mempamerkan kreativiti dan inovasi mereka. Antara yang menarik dan mendapat sambutan hangat dikalangan pengunjung ialah aktiviti pertandingan Robocon dan Sumo Robot, pameran Humanoid Robot, soft actuator, kerusi pneumatik, alatan bantuan pesakit lumpuh dan sebagainya.

Pada hari ke-3 program berlangsung, booth Fakulti Kejuruteraan Elektrik telah dikunjungi seorang pesakit lumpuh yang masih belum boleh menggerakkan tangannya. Pesakit tersebut telah mencuba alatan bantuan rehablitasi untuk pesakit lumpuh dan dia kelihatan lebih bermotivasi untuk berusaha menggerakkan tangannya setelah mencuba alatan tersebut.

Sesungguhnya, program-program ilmiah seperti ini dapat membuka minda dan mempertingkatkan pengetahuan masyarakat seterusnya membentuk pemikiran masyarakat minda kelas pertama. Diharapkan program-program seperti ini dapat terus dilaksanakan pada masa-masa akan datang.

Gambar Semasa Program…

 AIM 2012 Conference (11-14 /7/2012)

Advanced Intelligent Mechatronics (AIM) telah diadakan di Ambassador Hotel di Kaohsiung, Taiwan pada 11-14 Julai 2012. Dua kertas kerja telah diterima iaitu :

1)Nonlinear Mathematical Model of an Intelligent Pneumatic Actuator (IPA) Systems: Position and Force Controls

2)Development of Bending Soft Actuator with Different Braided Angles.

Pihak kami telah menghantar dua orang wakil iaitu Muhammad Rusydi dan Dr Ahmad ‘Athif untuk membentangkan kertas kerja itu.

Industrial Art & Technology Exhibition (INATEX) – (3-5 October 2012)

Industrial Art & Technology Exhibition (INATEX) is a UTM-wide yet prestige event that organized by Research Management Centre (RMC). This exhibition is R&D showcase and competition of UTM inventions and innovations developed by UTM researchers. The purpose of INATEX is to promote the research findings or product to the public by exhibiting the creative inventions and innovative products from the UTM researcher. INATEX is a screening platform for UTM Product for the competition at national and international level. INATEX also as a mechanism to enhance collaboration between researchers and industry which in line with the theme for INATEX 2012: “Sustainable: Commercialization through Innovative R&D”. This event was successfully held on 3rd October 2012 until 5thOctober 2012 at Dewan Sultan Iskandar (DSI), UTM, Skudai.

Participants from different kind of faculties joined in to support and show innovative and creative spirit, including students and researchers from Faculty of Electrical Engineering. Projects and research were demonstrated to the visitors. Hands-on demonstration set up was also included for the visitors to experience the excitements and acknowledge new ideas and concept regarding to each project presented.

Our groups have sent four projects which under Dr. Ahmad ‘Athif Mohd Faudzi. All the project that was presented in the exhibition which are Intelligent Pnuematic Actuator (IPA) System and It’s Application on Chair’s Seat Panel, Real-time Hand Gestures System for Mobile Robots Control, Wireless Switch In Smart Home Application andwhich was conducted by Nu’man, Khairuddin, Muhammad, Omar and The for the Pneumatic System, Rusydi, Ili and Sanjoy for Soft Actuator, Muhammad Asyraf and Chai Chang Kai for Hand Gestures and Irfan and Ridhuan for Smart Switch. The concept of IPA is basically pneumatic cylinders which are consists of PSoC (brain), pressure sensor, optical encoder and valve. It’s a novel creation by Dr Ahmad Athif which comes with a brilliant idea that makes pneumatic system more intelligent and useful. Intelligent Pneumatic Actuator (IPA) System and It’s Application on Chair’s Seat Panel is a intelligent yet creative project which attract visitors to learn and acknowledge new ideas that was created and developed by researcher from FKE and also goes to others project.

3D Inventor and CNC Machine Training (9 October 2012)

Our group has handled a hands-on training for undergraduate students. The course modules were “Inventor CAD” and “Handling CNC machine”. The objectives were achieving the knowledge and skills in design using Inventor CAD and molding using CNC machine.

During the Inventor CAD course, students were exposed with the basic in Inventor CAD and they were given a task to be done based on the knowledge which they have got. In Handling CNC machine course, students were exposed with 2D and 3D molding fabrications and the task has been completed successfully.

Picture During Training

 

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

 
<span>%d</span> bloggers like this: